Wall Cladding Sheet
Extensive range of interior plastic wall cladding sheets and profiles suitable for hygienic wall cladding, lining, sterile preparation and storage rooms, including chillers. Three different types of wall cladding sheets to choose from, each with specific characteristics to achieve the finish you require. Plastic Wall Cladding sheets with straightforward PVC trims and fittings. Installation can easily be carried out giving you considerable savings whilst producing a professional finish every time. Horizontal wall cladding systems are extremly similar to flat seam roofing that is applied on a vertical surface, however it removes the requirement of solder or sealant between the joins as the vertical surface provides adequate drainage.
Hygienic Polypropylene wall cladding sheets can be used in a variety of applications where safety and hygiene is paramount. Particularly useful in butchers and food preparation areas, as well as milk parlours where no contamination with the produce is essential. Hygienic cladding is also used is showering areas, equestrian centres, hospitals and laboratories, providing none slip surfaces as well as easy cleanable hygienic surfaces.
Wall Cladding Sheet Availability
| Wall Cladding | Sheet Thickness |
|---|---|
| Wall Cladding Sheet | 3mm |
Palopaque Solid PVC Sheet for Wall Cladding
- Good impact strength to 0°C
- Excellent rigidity
- Easily cut / formed
- Class 1 fire rating (to BS476)
Palight Foam PVC Sheet for Wall Cladding
- Good impact strength to 0°C
- Good rigidity
- Excellent thermal qualities
- Class 1 fire rating (to BS476)
Polypropylene Sheet for Wall Cladding
- Excellent impact strength to -20°C
- Food Approved
- Lightweight
- Easily cut / formed
- Class 4 fire rating (to BS476)
PVC Ceiling Cladding
- Cost Effective
- Easy Installation
- Tongue & Groove
- Class 1 Fire Rating
- Lightweight
- 5m length x 250mm wide ceiling planks
PVC Trims and Profiles for Wall Cladding
- Plastic Rivets
- 25mm Internal / External Angle (2440mm / 3050mm)
- 38mm Internal / External Angle (2440mm / 3050mm)
- 50mm Internal / External Angle (2440mm / 3050mm)
- Jointing "H" Section Division Bar 3mm & 6mm (2440mm / 3050mm)
- Small Inside Corner (2440mm)
- Wide Inside Corner (2440mm / 3050mm)
- Small J Capping Section (2440mm)
- Large J Capping Section (2440mm)
- Outside Corner (2440mm)
Wall Cladding Downloads
| PVC Trims and Profiles | |
| PVC Ceiling Cladding | |
| Polypropylene Hygienic Wall Cladding | |
| Palight Sheet | |
| Palopaque PVC Wall Cladding Sheet |
PALOPAQUE® and PALIGHT® are registered trademarks of PALRAM.
