Oil
Filled Nylon
Oilon®
(PA 6C + blended liquid lubricant) green
Nylube®
(PA 6C + blended solid & liquid lubricant) red
Ertalon®
LFX (PA6 + oil) green
Oil filled nylon (Oilon) rod has been especially
developed for unlubricated, highly loaded and slowly
moving parts applications, and yields a considerable
enlargement of the application possibilities of nylons. The nylon has been blended with a none drying out lubricant which increase sliding benefits and can also increase the life of bearings by 5 times in the heavy loaded applications. Oilon is just one of the many materials we stock in our extensive range of Engineering Plastics.
Oil Filled Nylon Availability
| . |
Round
Rods (mm) |
Sheet
/ Plates (mm) |
Tubes
O.D. (mm) |
| Oilon* |
10
- 500 |
6
- 120 |
45
- 1500 |
| Nylube* |
10
- 500 |
6 - 120 |
45
- 1500 |
| Ertalon
LFX |
50 - 500 |
10
- 100 |
50
- 600 |
| |
|
|
|
Please
note: Certain sizes are non-standard and are generally
not available from stock but manufactured to order.
For further information, please call the sales team
on 0191 258 0777. * product not available online
Oilon
(PA 6C + blended liquid lubricant) green
A complex blended oil lubrication system, uniformly
distributed throughout the product guarantees constant
performance over the whole service life of this exceptional
oil-loaded nylon. Excellent sliding frictional properties,
abrasion resistance and stick/slip performance make
this product a first choice for unlubricated moving
parts
- First
authentic lubricated nylon
-
Improved wear and abrasion resistance
-
Improved PV characteristics
-
Improved coefficient of friction and stick/slip characteristics
-
Consistent wear performance throughout product life
-
Reduced water absorption
-
Excellent mechanical, thermal and chemical resistance
properties
-
Good dimensional stability
-
FDA compliant for direct food contact applications
-
Blended liquid lubricant system
Nylube
(PA 6C + blended solid & liquid lubricant) red
This
supreme wear resistant grade of oil filled nylon contains
a combined liquid/solid lubricant system, which allows
for a coefficient of friction as low as 0.08. The material
has outstanding Pressure-Velocity capabilities and is
particularly suited to dry running bearing applications
throughout a wide load speed range.
- Outstanding
wear and abrasion resistance
-
Significantly improved PV characteristics
-
Improved operating temperature capability
-
Outstanding lubricity and low coefficient of friction
-
Greatly improved stick/slip capabilities
-
Wide load, speed and temperature operating range
-
Consistent wear performance throughout product life
-
Excellent dimensional stability
-
Blended solid/liquid lubricant system
-
FDA compliant for direct food contact applications
Ertalon
LFX (PA 6 + oil) green
This internally lubricated cast oil filled nylon 6 is
self-lubricating in the real meaning of the word. Ertalon
LFX, especially developed for unlubricated, highly loaded
and slowly moving parts applications, yields a considerable
enlargement of the application possibilities of nylons.
This because of its reduced coefficient of friction
(up to -50%) and improved wear resistance (up to x 10).
[back
to top]
Downloads
| Ertalon
LFX Oil Filled Nylon |
|
|
|
|
ERTALON®
is a registered trademark of Quadrant
NYLUBE®
& OILON® are registered trademarks of Nylacast
|
