Meldin Polyimide Sheets

Meldin Characteristics

• Temperature from Cryogenic to 315°C (Intermittently up to 482°C)
• Self-lubricating properties
• Superior strength and rigidity
• Long maintenance-free service for the most demanding bearing and structural applications

Meldin Availability

	Rod thickness	Plate thickness	Tube O.D. thickness
Meldin	Phone 0191 258 0777 for info	Phone 0191 258 0777 for info	Phone 0191 258 0777 for info

Meldin 2000

• Excellent Tensile Strength and Elongation
• High Compressive Strength
• High Modulus
• Superior Creep Resistance
• Superb Dimensional Stability
• Balanced Electrical Properties

Meldin 2001

This material is best suited for thermal and electrical insulation and radiation resistance. Meldin 2001 has the highest compressive properties of any material in the series.

Meldin 2021

A multi-purpose bearing grade for high-temperature and high-load applications, Meldin 2021 maintains its strength and rigidity at elevated temperatures.

Meldin 2030

The Meldin 2030 bearing compound operates with extremely low friction in both dynamic and static applications, and provides thermal and electrical insulation.

Meldin 3000

• Excellent Mechanical Properties
• No Post Cure
• Good Chemical Resistance
• Superior Weld-Line Strength
• Complete Mating Surface Compatibility
• Broad Design Flexibility

Meldin 3000A

Excellent multi-purpose, wear resistant material that is suitable for bearing, thrust washer, and piston ring applications. Meldin 3000A requires a minimum mating surface hardness of Rockwell C35.

Meldin 3000D

This bearing formulation is particularly well suited for use with soft mating surface materials such as soft stainless steel and aluminium.

Meldin 3000F

Components provide stiffness in addition to high wear resistance for excellent dimensional stability and good bearings properties. It is recommended for use when part requirements include high strength in thin cross sections.

Meldin 3000G

Use Meldin 3000G when the combination of high strength and electrical insulation is required. Components made from this material exhibit superior properties in tensile, flex, and resistance to deformation under load.

Meldin 3000H

This product offers the highest strength and stiffness in addition to electrical conductivity when static dissipation is required. Its very low rate of thermal expansion makes Meldin 3000H an excellent choice for high temperature bearings and components.

Meldin 5000 series

• Toughness and Durability
• Tight Tolerance Moulding
• Complete Product Offering
• Diverse Applications
• Transmission thrust washers & rings
• Compressor scroll tip seals
• Vanes for air motors and pumps

Meldin 5001

Meldin 5001 components offer superior strength in structural applications when electrical insulation combined with intricate part design is required. The melt characteristics of Meldin 5001 material allow for fine detail, regardless of part complexity.

Meldin 5025

Meldin 5025 components supply the highest level of strength and rigidity. It maintains its high tensile, flexural, and compressive properties, even at elevated temperatures.

Meldin 5055

Low-friction, wear resistant bearings custom moulded from Meldin 5055 compound perform at high loads and high temperatures with minimal deformation. Meldin 5055 is self-lubricating, operates quietly, and is resistant to most chemicals and fluids.

Meldin 5330

Specify Meldin 5330 when part requirements include structural integrity and high resistance to thermal expansion. This material exhibits good wear properties and dimensional stability, making it a good candidate for bearing applications.

Meldin 7000

• Geometric Stability at High Temperatures
• Longer Life at Higher Loads and Speeds
• The self lubricating grades of Meldin 7000 do not melt when exposed to high load (P), or high speed(V) applications

Meldin 7001 - Unfilled grade

A thermoplastic polyimide, Meldin 7001 is the unfilled base resin. This grade offers the maximum mechanical properties over a broad temperature range and excellent chemical resistance. It is ideal for electrical and thermal insulation applications. More ductile than ceramics and lighter in weight than metals. Meldin 7001 exhibits an outstanding strength to weight ratio making it an ideal replacement material for metals in difficult environments. It is also a popular choice for structural parts in aerospace.

Meldin 7021 - Self Lubricating grade

Meldin 7021 has 15% by weight graphite fillers, encapsulated by the base polyamide resin. With its low coefficient of friction and high heat resistance, Meldin 7021 provides our customers with the best all-round choice for high temperature bearings, seals and other low-wear applications. The bearing grade of the Meldin 7000 family with excellent wear and self-lubricating features in the most difficult environments. Excellent physical strength across its full operating temperature range, good chemical resistance and high operating PV's. Used in rigorous aircraft engine applications where high temperature and physical strength is critical.

Meldin 7003

Includes 15% molybdenum disulfide lubricating filler for wear applications that operate in a vacuum or in very dry conditions

Meldin 7022

With 40% graphite filler,the Meldin 7022 grade offers additional dimensional stability and the lowest coefficient of thermal expansion of any Meldin grade

Meldin 7211 - Lowest Friction Grade

Has 10% PTFE and 15% graphite filler,which provides our lowest coefficient of friction grade.

Meldin Downloads

Meldin	Meldin Brochure
Meldin 7000	Meldin 7000 Brochure
Meldin 7001	Meldin 7001 Datasheet