Ferrotron
Ferrotron is a non-conductive magnetic material consisting of pure iron powder uniformly dispersed in an insulating plastic binder. The small iron particles of Ferrotron form very small paths which, coupled with the insulating properties of the binder, result in high permeability low hysteresis losses and temperature resistance up to 300°C.
Ferrotron is a metallic / polymeric alloy of a very pure iron and high performance organics binders. it is easily machined - filed, sawn, milled, drilled, tapped, tuned or ground to your finished design without cracking or chipping. This combination of properties makes Ferrotron an ideal intensifying material for induction hardening, particularly of 'difficult' parts, such as gear wheels, ball grooves and dovetailed slides. Reductions in heating time of up to 600% can be obtained with Ferrotron inserts. Ferrotron is supplied in round and square sections in a range of diameters and lengths.
Ferrotron Characteristics
- High stability to magnetic shock
- Reduced energy cost
- Temperature resistant to 250°C
- Electrical non-conductivity
- Easy machining
- Frequency range 60hz - 50hz
- High power loadings greater than 40Kw
- Shorter cycle times
- Magnetically non saturating
Ferrotron Availability
| Rod thickness | Plate thickness | Tube O.D. thickness | |
|---|---|---|---|
| Ferrotron | Phone 0191 258 0777 for info |
Phone 0191 258 0777 for info |
Phone 0191 258 0777 for info |
Ferrotron Downloads
| Ferrotron |
FERROTRON® is a registered trademark of FLUXTROL Inc.
| Ferrotron | |
|---|---|
| Trade names: | Ferrotron |
| Available: | Plates, Rods, Tubes |
| Colours: | Please contact for details |
| Similar plastics: | Celazole PBI |
